update 1.5.2

ecu1pirates

Verified member
Jul 2, 2023
4
1
3
For some reason after I update it does not save the setting. it allows me to use however if I log off the program and log back on it has me redownload the update each time. Why is this happing.
 

Im this guy

Moderator
Staff member
Nov 5, 2021
1,126
133
63
For some reason after I update it does not save the setting. it allows me to use however if I log off the program and log back on it has me redownload the update each time. Why is this happing.
What software version are you on.
Is it the firmware update it is asking every time you turn the software on ?
Please export the log file from the software / having trouble section and attach it here
 

patator

New member
Apr 26, 2024
1
0
0
Bonjour
Je possède un azeron cyborg qui fonctionne correctement avec l'application "AZERON software V1.4.1".
J'ai essayé de mettre à jour mon azeron cyborg comme cela était demandé par l'application.
J'ai donc suivi les instructions pour installer l'application "AZERON software V1.5.2".
il n'y a pas eu d'incident.
au redémarrage de l'application; il m'a été demandé de mettre à jour le Firmware.
Lors de la mise à jour, j'ai eu un message d'échec (voir pièces jointes). j'ai réessayé plusieurs fois en suivant les instructions mais impossible de mettre à jour le firmware. J'ai même désinstallé l'application et réinstallé l'application, mais j'ai eu le meme résultat.
et si je ne souhaite pas faire la mise à jour du firmware, l'application se met en "read only mode".
Au final, j'ai dû réinstaller la version 1.4.1 pour que le azeron cyborg fonctionne de nouveau correctement.
Je joins à ce mail le log, ainsi que des captures d'écrans.
Merci d'avance pour votre retour sur ce problème
cordialement.

---------------- TRAD -----------
Hello
I have a cyborg azeron which works correctly with the "AZERON software V1.4.1" application.
I tried to update my azeron cyborg as requested by the application. so I followed the instructions to install the application "AZERON software V1.5.2". there was no incident. when restarting the application; I was asked to update the Firmware, during the update, I had a failure message (see attachments). I tried several times following the instructions but impossible to update the firmware. I even uninstalled the application and reinstalled it, but got the same result.
In the end, I had to reinstall version 1.4.1 for the azeron cyborg to work properly again.

Thank you in advance for your feedback on this problem
 

Attachments

  • azeron-logs-20240426-06-01-55.log
    382 bytes · Views: 18
  • Capture d'écran 2024-04-26 182016.png
    Capture d'écran 2024-04-26 182016.png
    13.2 KB · Views: 15
  • Capture d'écran 2024-04-26 182126.png
    Capture d'écran 2024-04-26 182126.png
    43.4 KB · Views: 16

Im this guy

Moderator
Staff member
Nov 5, 2021
1,126
133
63
Bonjour
Je possède un azeron cyborg qui fonctionne correctement avec l'application "AZERON software V1.4.1".
J'ai essayé de mettre à jour mon azeron cyborg comme cela était demandé par l'application.
J'ai donc suivi les instructions pour installer l'application "AZERON software V1.5.2".
il n'y a pas eu d'incident.
au redémarrage de l'application; il m'a été demandé de mettre à jour le Firmware.
Lors de la mise à jour, j'ai eu un message d'échec (voir pièces jointes). j'ai réessayé plusieurs fois en suivant les instructions mais impossible de mettre à jour le firmware. J'ai même désinstallé l'application et réinstallé l'application, mais j'ai eu le meme résultat.
et si je ne souhaite pas faire la mise à jour du firmware, l'application se met en "read only mode".
Au final, j'ai dû réinstaller la version 1.4.1 pour que le azeron cyborg fonctionne de nouveau correctement.
Je joins à ce mail le log, ainsi que des captures d'écrans.
Merci d'avance pour votre retour sur ce problème
cordialement.

---------------- TRAD -----------
Hello
I have a cyborg azeron which works correctly with the "AZERON software V1.4.1" application.
I tried to update my azeron cyborg as requested by the application. so I followed the instructions to install the application "AZERON software V1.5.2". there was no incident. when restarting the application; I was asked to update the Firmware, during the update, I had a failure message (see attachments). I tried several times following the instructions but impossible to update the firmware. I even uninstalled the application and reinstalled it, but got the same result.
In the end, I had to reinstall version 1.4.1 for the azeron cyborg to work properly again.

Thank you in advance for your feedback on this problem
Go through the attached guide, see if that fixes the problem.
 

Attachments

  • Azeron_Failed_to_Update.pdf
    286.7 KB · Views: 33

Im this guy

Moderator
Staff member
Nov 5, 2021
1,126
133
63
Seem to have lost the ability to put macros in after updating to v 1.5.2
Make sure you are on software profiles.
You might have to scroll down on the drop down menu as macro is the last option.
1714643379681.png
 

mianamiana

Verified member
Apr 10, 2024
9
4
3
Go through the attached guide, see if that fixes the problem.
I have the same problem, which also occurred in version 1.5.2. Even after trying the method you provided in the attachment, it still couldn't be resolved. My device is cyborg-compat.
1715063037527.png
 

Attachments

  • azeron-logs-20240507-02-26-00.log
    376 bytes · Views: 16

Im this guy

Moderator
Staff member
Nov 5, 2021
1,126
133
63
I have the same problem, which also occurred in version 1.5.2. Even after trying the method you provided in the attachment, it still couldn't be resolved. My device is cyborg-compat.
View attachment 3723
In the device manager, does the Azeron show up as STM32 Bootloader once you plug it in by holding 3 buttons ?
Got a DAC connected to PC ?
 

mianamiana

Verified member
Apr 10, 2024
9
4
3
Doesn't let you proceed with manual reflash ? -
Install the Cubeprogrammer 2.15!
In fact, I downloaded STM32CubeProgrammer 2.15.0, but I encountered an issue. Following the instructions in the video, I've already tried pressing all three buttons simultaneously and then refreshing, but still couldn't detect the USB port.
1715235666800.png

1715235375968.png

btw, I'm not sure if I've selected the correct firmware because I couldn't find the firmware for the Cyborg-Compact series, only for the Classic-Compact series.:eek:
 
Last edited:

Im this guy

Moderator
Staff member
Nov 5, 2021
1,126
133
63
This is an interesting question. In fact, I can't find the firmware for the Cyborg Compact series in E:\Program Files\Azeron\Azeron Software\firmware. Is this the one I highlighted in red? It seems to be for the Classic Compact series.I'm worried that I might have made a mistake and caused even bigger trouble.
1715234507832.png


Use the latest .bin file if it`s Classic or Classic compact
Or Cyborg.bin if it`s any of the Cyborgs

hex file is used for other boards, with reset button.
 

mianamiana

Verified member
Apr 10, 2024
9
4
3
iimm
View attachment 3729

Use the latest .bin file if it`s Classic or Classic compact
Or Cyborg.bin if it`s any of the Cyborgs

hex file is used for other boards, with reset button.
I know。The current problem is: I downloaded STM32CubeProgrammer 2.15.0, but I encountered a problem. Following the instructions in the video, I've already tried pressing all three buttons simultaneously and then refreshing, but still couldn't detect the USB port.
 

mianamiana

Verified member
Apr 10, 2024
9
4
3
In fact, I downloaded STM32CubeProgrammer 2.15.0, but I encountered an issue. Following the instructions in the video, I've already tried pressing all three buttons simultaneously and then refreshing, but still couldn't detect the USB port.
View attachment 3731
View attachment 3730
btw, I'm not sure if I've selected the correct firmware because I couldn't find the firmware for the Cyborg-Compact series, only for the Classic-Compact series.:eek:
I think I've solved the problem myself. The reason I couldn't detect the USB port after multiple refreshes was a driver issue. I downloaded a software called Zadig, found the STM32 device, installed the recommended driver for it, refreshed again, and Bingo! It appeared! Problem solved.
Now my Azeron Software v1.5.2 is running smoothly! Happy!
 
  • Like
Reactions: Im this guy