LED Lights

foxtroto5car

New member
Nov 8, 2021
3
0
1
Be nice to be able to dull or turn off the LED lights at the side which show you which profile you have selected. My setup is in my bedroom and it's so bright I have to pull the cable out of my Azeron every night.
Either not so bright LED's or a simple on/off switch would be good.
 

texasrebel75

Verified member
Nov 14, 2021
12
2
3
Under settings in Azeron software there is a LED slider to dim lights as well as an option to turn them on or off
Azeron screenshot.PNG
 

leo_jb

New member
Sep 29, 2022
4
2
3
Hi,
I have the same need but I don't find a way to do it with reWASD.
Azeron software doesn't work along with reWASD.
There is a Led setting page in reWASD but Azeron devices doesn't exist so far.

Is there a way to have it done ? (without needing physical modification)
If not is there a plan to have it supported in reWASD?
 

Im this guy

Moderator
Staff member
Nov 5, 2021
1,042
117
63
Hi,
I have the same need but I don't find a way to do it with reWASD.
Azeron software doesn't work along with reWASD.
There is a Led setting page in reWASD but Azeron devices doesn't exist so far.

Is there a way to have it done ? (without needing physical modification)
If not is there a plan to have it supported in reWASD?
Can't do it on the reWASD, not sure if it is planned on reWASD at some point.
If you don't want them at all. You can remove the grounding wire from the grounding block.
 

leo_jb

New member
Sep 29, 2022
4
2
3
Thank you for the answer.
That is what I was thinking, I will survive by removing the usb cable during the night.

Looking forward for the Azeron software to be again available!
 

Bizzy

New member
Sep 19, 2022
9
4
3
You can use the Azeron software to adjust the led and go back to use reWASD, that's what I did. Mine was pretty bright, so I dimmed it.
If you got a new Board take a look in pre release testing of discord.
 

leo_jb

New member
Sep 29, 2022
4
2
3
You can use the Azeron software to adjust the led and go back to use reWASD, that's what I did. Mine was pretty bright, so I dimmed it.
If you got a new Board take a look in pre release testing of discord.
Thank you for the information! Yes I have the one with a new board.
I joined the discord server and will look around to get the pre release version of the software.