ヘルプ

Sep 11, 2022
35
1
8
届いたばかりの新品ですが、ソフトウェアが反応しません。 商品はサイボーグで最新のソフトウェアをインストールしましたが、画面は左にsettingとあるだけでキーバインド等の項目がありません。
 
Last edited:

Im this guy

Moderator
Staff member
Nov 5, 2021
1,042
117
63
届いたばかりの新品ですが、ソフトウェアが反応しません。 商品はサイボーグで最新のソフトウェアをインストールしましたが、画面は左にsettingとあるだけでキーバインド等の項目がありません。
Make sure the usb cable is fully inserted.
What else have you got connected to PC ?
Have you got reWASD installed?
 

AZGUNS

Adept
Apr 22, 2022
173
71
28
届いたばかりの新品ですが、ソフトウェアが反応しません。 商品はサイボーグで最新のソフトウェアをインストールしましたが、画面は左にsettingとあるだけでキーバインド等の項目がありません。
私は、あなたがそれで何でもできる素晴らしいソフトウェアを買い直します。 Azeron ソフトウェアよりもはるかに優れているため、他のソフトウェアを使用することは二度とありません。
 
Sep 11, 2022
35
1
8
私は、あなたがそれで何でもできる素晴らしいソフトウェアを買い直します。 Azeron ソフトウェアよりもはるかに優れているため、他のソフトウェアを使用することは二度とありません。
azeronとは別のソフトウェアを買うことになるのでしょうか?
 

AZGUNS

Adept
Apr 22, 2022
173
71
28
azeronとは別のソフトウェアを買うことになるのでしょうか?
はい。 これは、あらゆるコントローラー用にこれまでに作成された最高のソフトウェアです。 マウスを別のサムスティックとして使用したり、キーボード マウスとコントローラーをすべてのゲームで 1 つのコントローラーとして表示したりできます。 これは、デーモン ツールのメーカーによって作成されました。 このソフトウェアを調べる必要があります。
 
Sep 11, 2022
35
1
8
Even after translating the subtitles, I still didn't understand.
If possible, it would be helpful if you could write down the steps in writing.
Please help me・・・
 

AZGUNS

Adept
Apr 22, 2022
173
71
28
Even after translating the subtitles, I still didn't understand.
If possible, it would be helpful if you could write down the steps in writing.
Please help me・・・
プロファイルをバックアップします。
エンドレスまたは空白のロード画面が表示されない場合にのみ、プロファイルをバックアップできます.
オンボード プロファイルは、オフライン プロファイル セクションにコピーする必要があります。
設定をクリックし、エクスポートをクリックして、プロファイルを保存する宛先を選択し、プロファイルをソフトウェア フォルダに保存しないようにします。
キーパッドのリセット
ソフトウェアの下部にある [ハードウェアをデフォルトにリセット] をクリックします。
問題が解決しない場合は、クリーン リセットを実行する必要があります。
PC から azeran ソフトウェアを完全にアンインストールする必要があります。
Windows の場合 アプリ データ ローミング フォルダーを見つけて、azeran ソフトウェア フォルダーを削除します。
azeron.eu/downloads にアクセスします。
そして、最新のファームウェアとファームウェア バージョン 28 を再ダウンロードします。
キーパッドを PC に接続します
ロゴの横にあるコントローラーのボタンが押し込まれていることを確認します。
ファームウェアバージョン28を解凍します
2つのファイルがあるはずです
teensy を起動します。ここでボタンを押して、teensy で hex ファイルを開きます。最初のボタンにする必要があります。
azeron-fx-28.hex を見つけます
コントローラーを逆さまにして、コントローラーの下部にあるリセットボタンを押します。これは、ラバー パッドの隣の一番下にあるコントローラーのロゴの近くにある非常に小さなピンホールです。
コントローラーのリセットキーを押したらプログラムボタンが点灯しティーンジープログラムの2番目のボタンになるはずです。
プログラミングが完了したら、十代の再起動ボタンを 3 番目のボタンにする必要があります。
ソフトウェアは、再起動が成功したことを確認する必要があります。
Azeron コントローラーの USB を PC から取り外し、再度接続します。

次に、Azeron ファームウェアをダウンロードするフォルダーに移動します。
以前にダウンロードした最新のファームウェアを解凍します。
コントローラーの正しいファームウェアであることを再確認してください
コンパクト、クラシック、またはサイボーグ。
hex ファイルを開くをクリックします 最新のフィルムウェア バージョンを開きますteensy を閉じてから、もう一度キーパッドのプラグを抜き、再度差し込みます。最新の Azeron ソフトウェア アプリケーションをダウンロードします。
azeron アプリケーションをインストールして開きます。
設定をクリックし、インポートに移動します 以前にプロファイルを保存した場所に移動します インポートを押します

Back up your profiles.
You can only back up your profiles if you are not getting the endless or blank loading screen.
Your onboard profiles must be copied to the offline profile section.
Click on settings and then click export choose a destination to save your profiles to be sure you do not save them in the eyes are on software folder.
RESETTING THE KEYPAD
At the bottom of the software click reset hardware to default.
If the issue persists you will need to perform a clean reset.
You will need to uninstall the azeran software completely off your PC.
In Windows Locate the app data roaming folder and delete the azeran software folder.
Now go to azeron.eu/downloads
And re download the latest firmware as well as firmware version 28
Plug your keypad into the PC
Make sure the button on the controller next to the logo is pushed in.
Now unzip the firmware version 28
There should be two files
Launch teensy now press the button to open hex file in teensy should be the first button
locate azeron-fx-28.hex
Turn the controller upside down and press the reset button at the bottom of the controller. It's a very small pinhole located near the logo of the controller at the very bottom next to the rubber pad.
Once you press the reset key on the controller The program button should light up in the teensy program should be the second button in teensy.
Once the programming is completed press the reboot button in teensy should be the third button.
The software should confirm reboot successful.
Unplugged the Azeron controller's USB from the PC then plug it back in.

Now go to the folder you download the Azeron firmware
Unzip the latest firmware you downloaded previously.
Double check that it is the correct firmware for your controller
compact, classic, or cyborg.
Click open hex file open the latest filmware version click the second button to load the latest firmware and install, once completed press the third button to reboot to controller once again. Close teensy then once again unplug your keypad and plug it back in. Now download the latest Azeron software application.
Install and open the azeron application.
Click settings and go to import navigate to the location you previously saved your profiles press import
 
Sep 11, 2022
35
1
8
Thanks for the detailed explanation.
Please let me know if you have any questions.
① In my case, it's brand new and I haven't imported anything, but is there a profile to back up?
② I can't find the app data roaming folder. I did a normal uninstallation, but even if I search my PC, azeron doesn't hit anything.
⓷ Regarding the reset button on the back of the main unit, there is no response even if you push the inside of the hole with the included screwdriver. Is that okay?

I would like to wait for your reply and start working on it.
Thank you again for your support.
Also, is it okay if I post in Japanese in the future?
 

Im this guy

Moderator
Staff member
Nov 5, 2021
1,042
117
63
Thanks for the detailed explanation.
Please let me know if you have any questions.
① In my case, it's brand new and I haven't imported anything, but is there a profile to back up?
② I can't find the app data roaming folder. I did a normal uninstallation, but even if I search my PC, azeron doesn't hit anything.
⓷ Regarding the reset button on the back of the main unit, there is no response even if you push the inside of the hole with the included screwdriver. Is that okay?

I would like to wait for your reply and start working on it.
Thank you again for your support.
Also, is it okay if I post in Japanese in the future?
Is the PC recognising Azeron, do the LEDS come on ? After you press the reset button on the bottom of the keypad, do the lights go off ?

Did you manage to re-flash the firmware ?

C:\Users{username}\AppData\Roaming\Azeron Software you should enable hidden items.

You can post in Japanese, will use translator to translate and hope for the best :)
1663582493643.png
 
Sep 11, 2022
35
1
8
IMG_0276.jpg

ソフトウェアをアンインストールして本体も接続しています。裏のリセットの穴はボタンの感触がありません。
C:\Users{username}\AppData\ Roaming\Azeron SoftwareはPC内を検索しても出てきません。
 
Sep 11, 2022
35
1
8
ソフトウェアをアンインストールして本体はPCから外しています。裏のリセットボタンは写真のように穴の中を突いてもボタンらしき感触がありません。
 
Sep 11, 2022
35
1
8
本体裏を外したら写真0279、それを外すと写真0278のようになっていました。0278の状態だとリセットボタンがわかります。。この中蓋は不要なものでしょうか?
 

Attachments

  • IMG_0279.jpg
    IMG_0279.jpg
    2.7 MB · Views: 72
  • IMG_0278.jpg
    IMG_0278.jpg
    3.3 MB · Views: 63
Sep 11, 2022
35
1
8
手順通りやってますがリセットができません。
動画では横のボタンを押すとランプが1つ光っていますが、私の場合は押すと2個光っています。