Search results

I get what you're saying, @Trazere, but that would require a significant redesign the top part of the arm. Definitely a lot more complicated than just making thicker paddles.

The circumference of my hand is ~25cm. Is the strap a limiting factor?

Any plans for a large?

Congrats on winning the August giveaway, @TWisTeD, your Cyborg looks great. Let me know how the tilt stand works for you. It would be nice to get some feedback from someone other than myself. (y)

Hey @TWisTeD, you and @Gobo are correct, the 11mm paddles do have a larger through hole at 2.7mm, whereas the 8mm one has a 2.1mm hole. I don't remember changing that. I'll update the models on Printables at some point in the near future. I'm glad to hear the paddles are working well for you...

I'm glad we're thinking along the same lines. I figured the spring would be too small, but it gives you the idea of what my initial design thoughts are. I did consider a thumb screw setup like you mentioned (and I've got an idea on how to do it floating around in my cranium), but I'd have to...

https://store.azeron.eu/customize/#b02100100203020203030321152121152115151515152121211521212121212121212121212121212121212115213715341544474915151515151521151515151515215149

OK, here's what I came up with. It's pretty much the standard Cyborg key, but I added a little leaf spring on the bottom. The design still needs some fine tuning but unfortunately I'm not at home, so further development will have to wait. The spring is only 0.4mm thick, and I'm not sure if the...

Whatever form my ideas take, they will be hardware ones. I don't do software. :sick::ROFLMAO:

Didn't mean to ignore you @LauraFranke. I'm not sure why Gobo had issues with the holes in the 8mm paddles. The 11mm and 8mm models are identical except for the height. That being said, there is going to be some variation from printer to printer, especially hobby level printers. I've never...

This is an interesting problem (my favorite kind). I've got some thoughts rattling around in my head but it might take me awhile to make them happen. I'll update this thread if I come up with anything. 👍

You can set reWASD to trigger the button press when releasing the key. Normally, it triggers when pressing. I think you can set this when you map the key in the software.

I would suggest putting a thin slice of rubber behind each paddle. Or maybe stack a couple pieces of paper behind the paddles. I wouldn't recommend over tightening the screws as they are just going into ABS plastic. After awhile, the threads could be easily stripped out.

Turns out my V1 tilt stand isn't terribly stable. It likes to roll, so back to Fusion. I wanted to do something with some curves this time, and this is what I came up with. It's a bit more organic looking, and the bottom reminds me of a deformed version of the Alienware logo. And a couple...

Any chance we could get a .PDF for the palm rest too?

Cyberpunk 2077 V1.6 dropped yesterday so I figured it would be a perfect time to... You guessed it, design a 30 deg tilt stand for my Cyborg! A coulpe hours in Fusion 360, and this is what I came up with: It's only 80mm long, so it easily fits on small printers like the Voron V0.1, and...

This sounds promising. Keep us updated on your progress @lZl.

@Gobo I'm glad to hear they print well with a resin printer and they look great. How do you like the grip tape? Until recently I've never used it, but I've got some on my mouse and it's ok. Haven't gotten around to putting any on my Cyborg. I'm not surprised to hear that you had to fine tune the...

Thanks for posting this, @TWisTeD. I meant to put a link in this thread, but I obviously forgot. (y)

I just posted them on Printables.com. Be sure to post a pic or two of your resin version. I decided 11mm was slightly too large, so I shrank them slightly to 8mm. Both versions are included in on Printables.